July 3, 2018
When I got the package it looked amazing and would do the job I needed. I connected the cables matching tags to tags, the plugs will go in only one way. I got it all connected and turned on my printer and clicked 'Auto-Home'
My Z-Axis started raising, my X-axis went to the right crashing in the the end of the arm, and my Y-Axis (bed) went to the front of the printer and was knocking repeatedly against the frame. I immediately shut down and disconnected all the cables. Reconnected the non-extended wiring and my printer resumed its functions correctly.
I expected higher quality from this, product testing, to be honest I expected it to be a plug and play cable set. In stead I will have to return this as it is incompatible with the CR-10S that was bought directly from Creality3D (my printer is NOT a clone). So very very disappointing.
May 27, 2018
I purchased it from Mech Solutions Ltd.
I give only 4 stars because there are not real extension cables !!! Pin 1 should be connected to pin 1 on both ends and so one but some pins were swapped on the cables I received.
For the bed cable, pins 3 and 4 were swapped. It's used for the thermistor, which has no polarity so it's safe to use as is.
For the hotend cable, 4 pins were swapped (3 and 4, 1 and 2). 3 and 4 were once again used for the thermistor. I don't know on the CR10 but on my Tornado, pins 1 and 2 can't be swapped ! I know that kit is for Creality, not Tevo, but once again an extension cable should not swapped pins. Imagine if you buy a power extension cable and Earth is swapped with Neutral on one side ...
So yes it can work with the Tevo Tornado but you will have to check the wiring and do some soldering (at least swap wires on pin 1 & 2 of the hotend cable).
Also you will have to mod the 3 end stop switch connectors of th extension cables but that mod is ok because that kit is not for the Tornado.
June 21, 2018
Extension work as advertised. Had one cable that was faulty, contacted the seller and had a replace cable 2 days later, no questions asked. That is how customer service is suppose to work. Highly recommend Mech Solutions Ltd. Have purchased many items from them and am 100% satisfied and will continue to purchase their products as I learn about 3D printing.
John Karlo Blanco
February 19, 2018
The extension is excellent for moving your controller further. It will make organizing your printer way easier. This is not the only thing I bought from Mech Solutions. I bought my printer from them as well. If I need anything else for my CR-10, I will get them from Mech Solutions.
June 13, 2018
does not extend the cable for the bed of the CR-10 mini. Seller needs to make it known it does not extend that cable. otherwise all other cables fit nice.
April 30, 2018
Revised review: aside from the comment coming next, well made cables.
Now for those that are as freaks as I am - one that checks pinouts on all connectors, be advised that on both main harnesses (bed and extruder) that 2 pins could be swapped. This can happen has those are both bed and hotend thermistors which do not have any polarity. It could be wise for the description to state such fact.
February 12, 2018
This is exactly as described. I'm glad I checked Amazon before purchasing off eBay or elsewhere. This saved a bunch of time and will allow me to move my control box out of the way on my table.
February 15, 2018
Outstanding service and products as normal, item is as described and works very well.
Check out their filiment aswell..very very good for price !!