SD Card Reader HUB, 4 in 1 to USB Camera Adapter, TF Card Reader, Nk108L Digital Camera Reader Adapter Cable, USB Splitter Adapter Sync, Compatible with iPhone & iPad, Plug and Play Yongxinzhuo

CA $18.89 In Stock
Customer reviews(1)
+
  • You can connect more USB accessories like hubs,keyboards,audio/MIDI interfaces,RJ45 Ethernet LAN Wired Network Adapter,card readers of SD and Micro SD and more.
  • Plug and Play: No App required,Automatically opens the Photos app when connected with camera or memory card, support JPEG/RAW/HEIF/HEVC image format and H.264/ MPEG-4 video format. ( for memory card photos and video need to be in DCIM folder).
  • PLEASE NOTE: 1. This USB camera connector may not work if the current over 100mAh. 2. The port of SD card / TF card and USB interface can’t be used at the same time. 3. Create a folder named DCIM in your memory card if transfer from a TF card, SD card or USB disk.
  • The upgraded iPhone OTG adapter compatibles with iOS 9.3 or later compatibility Version,compatible with the latest iOS 11.3.
  • Transmission is 14MB/S~16MB/S, Faster transfer of photos and videos between two iOS devices at USB 2.0 speed,support maximum 64Gb SD/TF card. A great choice for copying photos or videos to camera in a short period of time.


1.Cautions:
1.If iProducts appear“it does not support this accessory”Please make sure it was connect well, if the case of iPhone/iPad is too thick, take it off and try again.
2. Capacity of SD/TF card should lower than 64GB.
3. If pictures and videos are not taken by camera, but download by other ways, we should put pictures/videos into file named “DCIM”, pictures should be named as IMG_0000(or IMG_0001,IMG_0002 etc.), videos should be named as MVI_0000(or MVI_0001, MVI_0002 etc.).
4. For the SD/Micro SD/ USB, please use only one of them one time.
2.NOTES
1.The 4 in 1 Camera Connection Kit has 4 ports.However,USB port,SD port and Micro SD port can't be used at the same time.
The port can be used together with any of above 3 ports.For example,you can charge iPhone/iPad/iPod Touch and put keyboard type at the same time.
2.If USB flash disk/Micro SD card/SD card directly use with this kit,you must create "DCIM" folder.
3.Basic parameters
Operating Voltage:3.3V
Operating current:<100mA
Interface:SD Card/TF Card/USB Receptacle
W/R Speed:USB2.0 Speed(14MB/S-16MB/S)
4.Compatible Models:
Supports Latest iOS 11.3 system
-For iPhone: iPhone X, iPhone 8 / 8 Plus, iPhone 7 / 7 Plus, iPhone 6S / 6S Plus, iPhone 6 / 6 Plus, iPhone SE, iPhone s / c /
-For iPad: iPad Mini 2 / 3 / 4, iPad Air / Air 2, iPad Pro, iPad 2 / 3 / 4
Package included:
-1 x 4 in 1 Camera Connection Kit
-1 x User Manuala


Customer reviews(1)

Write Review
Joey Gardner
August 24, 2018
Affordable and fast drlivery

Recommend Products

Hoover Windtunnel Air Lite Vacuum UH72460CA

CA $90.99

Baoblaze 5 Pieces High-Quality Nozzle Throat for MK8 1.75mm Filament 3D Printer Extruder Accessories

CA $9.79

AFUNTA 12 PCS 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 Fit 3D Printer & Heat High Temperature Resistant Adhesive Polyimide Tape for Electric Task - Red & White AF-heater+tape

CA $16.09

Shark Navigator Lightweight Upright Corded Bagless Vacuum for Carpet and Hard Floor Cleaning with Swivel Steering (NV105), Blue SharkNinja

CA $124.62

Mech Solutions Ltd 12 Pieces MK8 Extruder for 1.75 mm Filament 3D Printer Nozzle (6 Different Size 0.2mm, 0.3mm, 0.4mm, 0.5mm.0.6mm, 0.8mm) for 3D Printer (Makerbot, Creality, RepRap,etc) CCT-10PC-Nozel-Set

CA $9.79

V6 Hot End Full Kit, MYSWEETY 3D Printer J-Head Hotend with Fan + 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for RepRap 3D Printers

CA $48.59

Iron Peak 3D Heat Bed Mosfet High Current 210A Expansion Upgrade Board for 3D Printer, Wanhao, Monoprice, Reprap, I3, ANET A8 IRN3D-01203

CA $10.49

2PCs Iron Peak 3D LM8LUU 8mm Long Linear Ball Bearing Bushing CNC Part, 3D Printer, Wanhao, Monoprice, Reprap, I3, ANET A8 IRN3D-01202

CA $9.09