Smooth-On XTC-3D High Performance 3D Print Coating - 24oz. Unit Inc.

CA $50.94 In Stock
Customer reviews(3)
+
  • Epoxy Coating for 3D Printed Objects
  • Smooths 3D Printed Objects
  • Compatible with SLA and SLS prints.
  • It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.


XTC-3D is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy. Inexpensive to Use - 1 oz covers 100+ square inches. 90% Time & Labor Savings: XTC-3D fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated. Coat any 3D Print Surface - XTC-3D can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper. XTC-3D does not contain VOC's, phthalates or phosphates. Adult Supervision Required. Keep Out of the Reach of Children.


Customer reviews(3)

Write Review
Client d'
September 29, 2018
Super donne une belle finition
Louis Beaulieu
February 20, 2017
Works well! Not flexible at all though. To be use on hard parts only. Epsilon Pro will offer great flexibility without cracking.
haibin wan
January 27, 2018
It works very well.

Recommend Products

HICTOP LM8UU Linear Bearings for 3D Printer, RepRap Prusa Mendel DIY CNC Motion, Prusa Mendel, reprap Pack of 6PCs (8mm x 15mm x 24mm) HIC Technology

CA $11.03

Mech Solutions Ltd 15 PCS 3D Printer Heating Block Cotton and 1 Roll Adhesive Gold Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10S 3D Printer

CA $9.79

Mech Solutions Ltd 10 Pieces 0.4 mm E3D V6 1.75mm Extruder 3D Printer Stainless Steel Nozzle for 3D Printer (Lulzbot, Ultimaker, Pulse, Robo, MakeBot,etc) E3D-SS-10-0.4

CA $10.49

2PCs Iron Peak 3D LM8LUU 8mm Long Linear Ball Bearing Bushing CNC Part, 3D Printer, Wanhao, Monoprice, Reprap, I3, ANET A8 IRN3D-01202

CA $9.09

2 Sets T8 Anti-Backlash Spring Loaded Nut Elimination Gap for 8mm Acme Threaded Rod Lead Screws DIY CNC 3D Printer Part Uranny

CA $1.39

Mech Solutions Ltd 3D Printer 30 mm Throat Tube Stainless Steel M6 for MK 8 Extruder for Creality CR-10/CR-10S/S4/S5/Mini, Makerbot, RepRap, Prusa i3 (Pack of 5 pcs)

CA $6.99

Ivelink PC4-M10 Straight Pneumatic Fitting Push to Connect + PC4-M6 Quick in Fitting for 3D Printer Bowden Extruder (Pack of 20pcs)

CA $12.59

Tiptiper Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer Motherboard

CA $9.58